Save paint, time, and money!

The Masterson Sta-Wet Sponge is designed to fit in the Masterson Sta-Wet Super Pro Palette.

The Masterson Sta-Wet Sponge keeps water-soluble paints moist during and between painting sessions for days and weeks. The cellulose sponge evenly and effectively transfers moisture to the Sta-Wet Acrylic Palette Paper, ultimately extending the life of your paints. The cellulose material provides the absorption level required for the Sta-Wet system and is environmentally friendly.

Use the Sta-Wet Sponge in combination with the Masterson Sta-Wet Super Pro Palette Acrylic Paper to achieve an even moisture distribution in your paints.

Wet the sponge and place it in the tray of your Masterson Sta-Wet Super Pro Palette. Then, lay the Super Pro Palette Acrylic Paper on top of the sponge. The paper will absorb the moisture, maintaining the paint's workability.

Please follow all Sta-Wet Sponge preparation directions provided to extend the use of your sponge.

Pack of 3 sponge size 10 in x 14.5 in (25.4 cm x 36.8 cm)

HELPFUL HINTS

Masterson Sta-Wet Acrylic Paper is reusable. You can wash off the paint with light scrubbing and reuse it immediately, or let it dry and re-wet it later. Both sides of the paper are usable, and paint stains do not affect the process.

If you paint often and anticipate that you will be changing your paper frequently, prepare several sheets of paper at the same time per directions for Use

#1. After the paper has been appropriately soaked, allow it to dry and store it in a convenient place. When you need a new sheet, rinse it under the water for a few minutes, and it will be ready for use. You can store it in a convenient place. When you need a new sheet, rinse it under the water for a few minutes, and it will be ready for use.

If you paint in sweltering, dry, or windy conditions, water evaporates from the paper, and blotting may occur. If the edges of the paper begin to dry, add some water to the sponge. Please don't LET THE PAPER COMPLETELY DRY OUT BEFORE REHYDRATING. To rehydrate the sponge, lift the paper and sponge together in one corner and pour some water into the tray. Gently tip the tray back and forth to distribute the water evenly. Use your fingers to press down any dry spots on the paper onto the sponge.

TRANS PORTING YOUR PALETTE- while the lid fits snugly onto the tray. THE SEAL IS NOT WATERTIGHT. Before transporting your palette, gently squeeze more water from the sponge before closing the lid. When the tray is horizontal, water evaporation doesn't occur, so the sponge does not need as much water. The container should be transported in a horizontal (flat) position.

If mildew or unpleasant orders occur, use distilled water to moisten the sponge. Or add ¼ teaspoon of ammonia to a water basin and use it to wet the sponge. Ammonia will not affect the paper, the sponge or your paints. You can also lightly mist your sponge with a can of Lysol before placing paper on it.

The sponge is very durable and can be cleaned in the washing machine. DO NOT USE BLEACH TO REMOVE STAINS. Paint stains will not affect the process.