Watercolour Ground Iridescent Gold 4oz by DANIEL SMITH

Daniel Smith Watercolour Iridescent Gold Ground allows you to use on almost any surface for water media. The pigment used is Mica and Iron Oxide (PW 20). The lightfast rating is excellent.

For deepest gold, apply 2 to 3 thin coats of the Iridescent Gold Watercolour Ground. Your transparent and semi-transparent watercolours will add a glaze of colour when painted over the Iridescent Gold Ground modifying their colour. You can paint over an entire surface with the ground or only in areas that you wish to add iridescent gold effects, perhaps using the other DANIEL SMITH Watercolour Grounds in the other areas if you are not applying it to watercolour paper.

Apply the Watercolour Ground straight from the container using a foam brush or a synthetic brush for a more textured finish. For the smoothest surface, apply very thin coats with foam brush, allow to dry thoroughly between coats. Curing: to allow the watercolour ground to attain the correct degree of absorption, let the watercolour ground dry and cure for at least 24 hours (depending on humidity) after the last coat. As with all the DANIEL SMITH Watercolour Grounds, our Iridescent Gold Watercolour Ground provides a surface to paint with your watercolours on most any substrate, and it is mixed media friendly.

The DANIEL SMITH Iridescent Gold Watercolour Ground has an excellent lightfastness, is archival and gives you more creative ways and surfaces to paint with watercolours!

Think of all the Creative Possibilities with this new Iridescent Gold Watercolour Ground from DANIEL SMITH!